Question:
- How many coils are in the Beamer mat
- & what gauss & frequencies does it run at?
Answer:
Based on the specifications provided, here are the answers to the customer’s three questions regarding the Beamer Tech PEMF Mat.
1. How many coils are in the mat?
The Beamer Tech Mat uses one continuous conductive coil rather than multiple individual electromagnetic coils distributed throughout the mat. It uses advanced conductive rubber technology, meaning the entire mat acts as one large conductive coil. This design helps provide a more consistent magnetic field across the mat, avoiding areas of unusually high or low coil concentration.
2. What Gauss does it run at?
The Beamer Tech Mat offers two intensity settings through its controller:
Low setting: 500 Gauss, High setting: 2,500 Gauss
[Gauss (G) is the unit used to measure magnetic field strength]
3. What frequencies does it run at?
The Beamer Tech Mat’s frequencies are generated by its controller. It offers five different frequency programs, each containing 10 frequencies.
The frequencies are:
Setting
Program
Frequencies (KHz)
1
BEAMER PEMF Program
0.16, 0.35, 0.95, 5.26, 27.5, 52.5, 225.47, 522.53, 682.02, 750
2
PTSD & STRESS Program
0.14, 0.68, 2.5, 60, 122.53, 300, 496.01, 655.2, 750, 912.33
3
Arthritis, Rheumatism & Osteo Program
0.05, 0.9, 9, 11.09, 55.33, 225.47, 398.4, 425.71, 522.53, 642.91
4
Muscle Pain Program
0.03, 0.37, 0.78, 0.9, 7.5, 20, 322.06, 377.3, 425.71, 568.43
5
Back Pain Program
0.14, 0.4, 7.5, 55, 96.6, 376.29, 425.09, 571, 833, 932
Waveform = Square wave.The Beamer Tech Mat is designed differently from traditional PEMF mats that use multiple individual coils. Instead, it uses conductive rubber technology, allowing the entire mat to function as one continuous coil. Its key specifications are:
(1) Coils: One continuous conductive coil covering the mat.
(2) Magnetic field strength: 500 Gauss (Low) or 2,500 Gauss (High).
(3) Frequencies: Five preset programs, each containing 10 frequencies.
(4) Waveform: Square wave.
(5) Frequency range: 0.03 Hz to 932.33 Hz.
(6) Direct Connection to RDPV3 for adding extra programs
The combination of a full-mat conductive design, adjustable magnetic field intensity and five pre-programmed frequency settings provides users with a range of PEMF operating options to suit their individual preferences and intended applications.
You can also use this with the Rife Digital Professional V3 machine which can expand your frequency options to all available frequencies.
