Question:
I’ve purchased the Rife Digital Professional V3. I was wondering if someone could give me some advice as I have many issues. I don’t know if there is a preferred order to things, how often do I do frequencies on one issue before moving on to the next. I have Rheumatoid Arthritis, Lyme, Babesia, Bartonella, mold, hypothyroidism, candida. I feel a bit overwhelmed. Thank you for any advice.
Answer:
You would prioritize according to the seriousness of the condition.
So, I would start with LYME, as that can lead to other things. I would put some focus on that, sleep with it.
You can then probably do the Rheumatoid Arthritis during the day with whatever time you have, alternate, and I would put a good deal of focus on the LYME.
But, you have the V3 machine, so you have the GROUP SWEEP function. You can set that up so it goes through all your issues.
The Babesia & Bartonella will be covered in the LYME set.
So you have 5 reasonably serious issues to resolve.
Group 18:
Molds (General) and human fungal symptom
77.00, 126.00, 133.00, 177.00, 181.00, 188.00, 232.00, 242.00, 271.00, 288.00
2043: Lyme Disease
0.11, 0.49, 0.73, 2.25, 7.5, 30, 270.28, 333.91, 791.03, 905.07
223: Arthritis, Rheumatoid
0.05, 0.9, 9, 11.09, 55.33, 225.47, 398.4, 425.71, 522.53, 642.91
1762: Hypothyroidism
0.08, 0.22, 0.73, 2.7, 5.71, 50, 322.53, 415.7, 566.41, 707.26
573:
Candida
0.04, 0.4, 0.78, 5.29, 7.5, 37, 320.05, 434, 792, 985.67
Also, look at this PAGE on BLOG it will give you more of what you can do for Candida.
OK, so all of that being said, I would set the Group SWEEP up for these issues. You have 30 groups, I would put the LYME set in 8 to 10 of them, and then divide up the remaining groups with the other 4 sets.
As things start to improve then change the Group SWEEP to reflect that.
Group SWEEP will stay on each frequency for 3 seconds or so, which is why you repeat the frequency set over several groups. You want each issue to get as much time as possible. Here are two pages I did to give you an idea of what this can look like:
During the day you can choose one set to focus on to give it more time by using the SWEEP or Pulse SWEEP function. I would use SWEEP because that will stay on each frequency for 10 min. and then move on to the next.
Pulse SWEEP stays on each frequency for 1 second, the pulsing adds a little bit of energy to push the signal deeper into the tissues and such, but still, SWEEP will be the better complement to the Group SWEEP function. If you don’t have time for a full treatment on SWEEP then use the Pulse SWEEP. This way if you only have 15 min. to spend, Pulse SWEEP will deliver all 10 frequencies throughout the time you have to spend.
It will take you a little bit of time to set the machine up, but, once you have done that, you will feel really good about it, and you have created a good treatment plan.
Be careful that you do not PUSH the MASTER RESET button on the machine. It will put everything back to the way the machine comes to you when it is new. Maybe put a small piece of RED tape, or something over that button.
I have pushed that before by mistake, and had to set everything up again. It’s not the end of the world, but you would have to do that again.
Link to the Healthproducts2 Home: | |
DISCLAIMER |