A. The multimeter will read approximately 7.8 – 8 volts on a RifeDigital PRO or RifeDigital Ultimate (Multimeters cannot read voltage on Square Wave),(However) if using an oscilloscope, you will read the (correct) true output of the upper + lower frequency wave, which should be approximately 16 volts.…
B. The multimeter will read approximately ~ 5 volts on a RifeDigital Bioresonanz (Multimeters cannot read voltage on Square Wave), (However) if using an oscilloscope, you will read the (correct) true output of the upper + lower frequency wave, which should be approximately 12 volts.…
Do not use a multimeter to check the voltage on a frequency wave or you will get the incorrect 50% (reading) result Always measure voltage output on a frequency wave with an oscilloscope which measures the whole frequency wave, not just half of it.
Link to the Healthproducts2 Home: | |
DISCLAIMER |