For Straps, Mat, Belt and other surfaces
Danolyte brand Hypochlorous Acid (HOCl) 500ppm FAC Use Guide – for full use instructions, refer to product label.
Danolyte is an EPA Registered hospital-level disinfectant cleaner. Ready to use formula. Spray on previously cleaned surface or spray & clean lightly soiled areas and allow to dry.
Non-irritating to skin, No PPE required for protection from the disinfectant cleaner, but may be required and is recommended to protect against germs, viruses, bacteria and pathogens. Danolyte has demonstrated effectiveness against viruses similar to SARS-CoV-2 on hard porous and/or non-porous surfaces. Therefore, Danolyte can be used against SARS-CoV-2, Covid19 when used in accordance with the directions for use against Adenovirus Type 1, on hard, porous/non-porous surfaces. Refer to the CDC website at www.cdc.gov/
DISINFECTION APPLICATIONS – Hard Non-Porous Surface Disinfection: To Clean, Disinfect and Deodorize Hard, Non-Porous Surfaces: For heavily soiled areas, a preliminary cleaning is required. Apply, wipe, spray, or dip Danolyte® at 500 ppm FAC to hard, non-porous surfaces with a cloth, wipe, mop or sponge. Treated surfaces must remain wet for 10 minutes to disinfect the most difficult pathogens and bacteria. For sanitizing, treated areas should remain wet for at least 2 minutes. Allow surfaces to air dry. Danolyte can be applied with fogger, sprayer, rags, and mops.
Spray Bottle: Simply spray onto a surface and allow to air dry. Perfect for door handles, table tops, desks, bathroom fixtures or other small surfaces. Foggers and Sprayers: First make sure that the equipment is rated to be used with HOCl and follow all equipment manufacturer directions. Second, pour solution into fogger or sprayer and lightly spray previously cleaned surfaces or spray & clean lightly soiled areas. Allow to air dry. Do not spray directly onto electronics. Do not use on steel, aluminum, silver, or chipped enamel. Prolonged contact with metal may cause pitting or discoloration.
Test in an inconspicuous place for color washout or contact incompatibility. Avoid over soaking and prevent pooled or puddled areas. Danolyte was tested for efficacy AOAC testing methods for hospital disinfection and OSHAs Blood-borne Pathogen Standards. Danolyte is a one-step disinfectant cleaner designed for general cleaning and disinfecting hard, non-porous environmental surfaces in health care facilities. Danolyte contains no alcohol, dyes, fragrances, phenols, VOCs, harsh fumes, or harsh chemicals.
FIRST AID: Call a poison control center or doctor for treatment advice. Have the product container or label with you when calling a poison control center or doctor, or going for treatment. You may also contact the National Pesticide Information Center (NPIC) 1-800-858-7378 for emergency medical treatment information.
Link to the Healthproducts2 Home: | |
DISCLAIMER |