2. Introduction:
Congratulations on your purchase of your Electrotherapy-Device (ETD). The following guide provides an introduction to electrotherapy and recommendations for the use of your device. Also provided is the official ETD frequency list, revised for your device, an introduction on parasites and the description of a liver cleanse, that we recommend strongly. We wish you every success with your therapeutic treatments and the positive experience of using your new device!
CAUTION: This machine is an electrotherapy device with a very high frequency output potential. Read this brochure carefully and use your electrotherapy devices exactly as directed!
3. Technical Information:
Technical information regarding the programming and general operation of your ETD device is provided in a separate €œQuickstart€ manual, along with a €˜Frequently Asked Questions€ guide, and an International Contact page
4. Basics:
What is electrotherapy treatment with the ETD for?
- Use electrotherapy to fight certain viruses, bacteria, parasites, etc. The electrotherapy works in a similar way as Homeopathy: using natural principles to heal the body. Everything around us already has an electrical charge and thus a certain electrical frequency €“ we are always and everywhere exposed to it. If you have a specific virus, it lives in a given frequency field. Let us assume for simplicity it lived only at one single electrical frequency. When you feed the same frequency generated by an ETD to your body (with very particular waves), the virus gets over-stimulated and dies.
- Use electrotherapy to restore vitality and health: The programs are producing a harmonic resonance in the body. Each symptom brings electric dissonance in the organism. With the more general programs such as back pain, detoxification programs for lung, liver, etc., the dissonance in the body will be transformed into harmonic resonance. Such programs are particularly useful for meridian treatments connected with 4 strap-combinations.
Page 3
5. Treatment Modes
5.1. MANUAL
<RUN> Mode: In RUN-mode, you are working on a single frequency and you can control the treatment time manually (e.g. RUN a single frequency for one hour, or manually run the frequency for 7 minutes on, and press RUN again to pause for a 10-minute break etc.). You do treatments with RUN-mode when you want to work specifically with only one frequency and when you know the actual frequency you want to work with. You can use a single frequency for many hours and another for five minutes
5.2. AUTOMATIC
<SWEEP> Mode: In SWEEP-mode, you treat with whole frequency-sets within a preset time (10 frequencies, with 10 minutes each = 1 hour 40 minutes). The frequencies that you use are sourced from the ETD Frequency List (provided), and are frequencies that have been used successfully to treat the respective diseases. Many diseases can not be attributed to just one pathogen and/or they always occur with so-called secondary symptoms. Consequently, the frequencies included in these sets, represent the best frequency-bandwidth for the treatment of each respective disease.
5.3. FACTORY PRESETS
<SWEEP> Mode: Without any alterations to the internal programs, the user may run the Factory default settings which run from lowest frequencies up to 1 million Hz in a period of 1 hour and 40 minutes. This allows a general sweep for unknown disease conditions, or permits a non technical person to use the device by simply turning on the machine and pressing one button <SWEEP> to commence the therapy. Professional models will have the Factory Presets listed in the Quickstart manual after November 2011
5.4. HOW OFTEN DO YOU CHANGE THE PROGRAMS?
Do not change the programs too often, but focus on one disease that you want to treat with one Frequency Set. Conduct regular treatments (5 days with 2 days rest), until your symptoms have disappeared. Sometimes it is recommended to use 2 different frequency sets for one particular illness; in this case switch between the 2 sets in weekly intervals. If you do not feel any change within 5 days, then you probably are working with a wrong frequency set and you should try something different.
Page 4
The programmed frequency set of 10 frequencies is stored on a built-in memory card and remains the default program even if you turn off and unplug the device completely. If you want to delete the programmed set, please follow the instructions to reset the device €˜
6. Recommendations for Treatments
6.1. General recommendations:
If you are new to this form of therapy or if you have not used an ETD for a long time or ever before, we recommend starting the treatment slowly. In the <SWEEP> mode, run a maximum of one cycle a day, possibly divided in two sessions (first 5 frequencies, then a few hours later, the other 5).
After a few days with this rather conservative treatment, you can increase the treatment time to 2 <SWEEP> cycles per day. If you regularly work with the device, then you can start treating overnight with attached foot-straps. This way you accomplish 3 to 4 cycles during sleep and will experience very immediate healing successes. Generally speaking, sleep is not disturbed; many users even describe quite the contrary, they feel more clearer and more alert after nights on electrotherapy treatments.
The ETD Frequency book lists thousands of diseases and ailments, with accompanying 10 frequencies . Sometimes, the choice is simple, for example if you have a cold then simply program your device with the frequency set for €˜common cold€™ and set your machine on <SWEEP>. More complicated disease conditions may require an individualized program.
6.2. General disease treatments:
General treatments would be considered Parasite Cleanses, Cold or Flu treatments, Candida or Skin diseases, bacteria, viral infections and Detox, to name a few. These conditions can be treated over a period of 21 €“ 30 days
For General Parasite Treatment we recommend the:
Parasites general comprehensive: 0.16, 0.30, 0.68, 0.90, 2.50, 5.50, 13.93, 93.50, 356.72, 451.17
Page 5
Program the ETD with each frequency and use for 10 minutes per frequency. Many people use the ETD on the feet at night and for the first 21 days of the cleanse 1-6 hours per day or night, while resting or sleeping. Place wristbands on both feet with the Silver side touching the soles. Program all the above frequencies and allow the frequencies to cycle overnight in a loop every 100 minutes.
If you are not aware of the condition being treated, simply use the default frequency set built into the machine, and use the <SWEEP> Key to run the frequencies according to the instructions above.
6.3. Serious Disease Treatments:
More serious diseases often require a longer treatment period, and often permit a course of frequencies that may change every few weeks. Our devices have been used successfully to treat serious diseases for thousands of people. Time and again, the results have shown that the extended treatment sessions have produced the best healing responses.
Extended sessions are more convenient at night, so as not to interrupt daytime activities or work schedules. An overnight session with the straps attached to the feet will permit a deeper healing which will reach and penetrate the organs of the body. For example the intestines are an organ that could previously not be reached by early frequency devices; now with the ETD, one can eliminate parasites and pathogens that inhabit the intestine and other organs such as the liver, kidneys, gall and stomach. However it does take time, and you are required to use frequencies that resonate closely with the pathogen or parasite involved. We recommend the <SWEEP> mode for this purpose as it scrolls through the 10 frequencies every 10 minutes in a loop cycle. Each frequency resonates with the healing program in order to treat the particular disease condition.
Because the ETD works using natural frequencies, three months may be a plausible time period for a remission of more serious disease conditions. Natural medicine works in this manner, on a more subtle level and over an extended period of time. Again, best results are achieved with the extended overnight treatment sessions.
Page 6
6.4. How to choose the frequencies
If you have symptoms that can not be identified so easily, then there are several methods to choose you treatment program:
- To select the correct frequency or frequency set, you can work with kinesiology (muscle testing, based on the principle that the body already knows what it needs; you can work with a kinesiology practitioner or learn this technology for your own home-use). Some clients work with the pendulum, which is also easy to learn.
- There are electrotherapeutic devices that are able to write very precise diagnostic profiles. Those are often used by homeopaths (Vega machine) or in natural healing practices (Bioresonance-Devices). These are based on the same principle, only that they start from a completely healthy body and then measure and diagnose the dissonances that are present in the unhealthy body. So you could look up such a clinic, get a diagnostic profile and then treat yourself with your own device.
- Most disease frequencies are listed in the book, however Medical definitions can change over time or be compiled into a new definition. If you can€™t find a frequency, you may have looked in the wrong section of the book: For example: Skin Cancer would be listed as €œCancer, Skin€. Or Tapeworms would be listed as €œParasites, Tapeworms€ for example. If in doubt email your machine supplier for the correct frequency set.
- If you use your ETD regularly you will observe another important side-effect: you get to know your body much better, you will become more sensitive to the physical processes of this therapy. You will be able to assess your illnesses and therefore choose your own treatments more accurately. You will be able to identify the frequencies that are bringing you into greater health and bring in new sets of frequencies when required.
7. Cautionary note on Treatments
You cannot €œdo anything wrong€ with these treatments. If (for example) you use the device to eliminate a particular parasite, and you do not have this parasite, then the electrical frequency may simply fade without effect on the body. There has been research that shows that pathogens live in specific frequency ranges. If you cross frequency ranges with other
Page 7
Pathogens or parasites of a similar resonance it is likely that you can eliminate that species. We recommend changing frequency sets if you do not feel change of disease symptoms after prolonged treatment (5 days). The ETD Frequency book will provide other frequency options to assist with further treatments.
7.1 What is Herxheimer reaction?
When you begin the electrotherapy- treatments, many parasites and pathogens are killed. This can overwhelm your immune system and lead to nausea, fatigue and dizziness. This is called the €˜Herxheimer effect€™, or €šParasite-Die-Off-Syndrome€™, an immune system response to toxins in the blood and tissues. This brief overloading of the liver and other eliminating organs worsen your symptoms at first. This can be a for a few hours, but can also last up to 2-3 days before you begin to feel much better. It is important to know that the worsening of symptoms does not mean the treatment has failed; in fact, it is exactly the opposite, namely the evidence for a very strong and effective detoxification.
7.2. What to do when a Herxheimer reaction occurs?
The most important thing is to accept this physical reaction, as a confirming result of the treatment. If it is very severe, then reduce the time of treatment, drink lots of water (at least 4 L per day) and rest (no exercise!), eat lightly to not burden your digestive system additionally, add freshly squeezed lemon juice to your drinking water and make sure that your digestion system is working properly (using Epsom salt or natural laxatives may be recommended). Take a rest from the Electro Therapy sessions for a few days until you recover.
7.3. ETD warnings
- It has been suggested that Pregnant Women should not use electro-frequency-devices.
€¢ It is advised not to use ETD if you wear a pacemaker, although there have not been any reported contraindications to date - It has been suggested that frequency output generated in the bandwidth of Lactobacillus Acidophilus: (346.05, 347.00, 348.00, 349.00, 350.00, 351.65, 352.00, 353.00, 354.00, 355.00) can trigger Candidiasis (Candida) in some people. If your treatment program ranges within the bandwidth of this natural stomach and intestinal flora, then take daily €œPro Biotic€ supplements , available from health food stores. Lactobacillus acidophilus is also found in natural yoghurt, Kefir and Kombucha.
Page 8
7.4. Important note:
In rare cases there might be a tingling sensation on the skin due to the use of our ETD. This usually happens only when using the wrist-straps on sensitive skin such as abdomen, wrists, or other soft skin areas. To avoid this, please use the wrist-straps only in the palms of your hands or on the soles of your feet.
Using the straps in sensitive skin area despite the above described tingling sensation for a long time, can cause a local rash. If you really need to treat at these locations, please move the straps regularly every few minutes, in case of tingly sensation. The best places to conduct treatments
over a longer time period are the palms of your hands and/or soles of your feet.
7.5. How to wear Straps
The best place to carry out several hours of treatment (such as overnight) is the soles of the feet in a way that the stainless steel button touches the bottom of your feet. The soles of the feet have very thick skin and are able to tolerate long periods of electrotherapy.
We recommend using the straps preferably at the soles of the feet in a way that the blue conductive coating touches the undersides of the feet. The stainless steel button must always touch the soles.
Page 9
Page 10
7.6. Suggestions for reliable machine operation
Your Electrotherapy Device is a powerful machine, As a result of this, the box itself will operate at a higher temperature than previous models. These higher temperatures are normal and tested safe. The operating temperatures are:
93° €“ 109° Fahrenheit or 34° €“ 43° Celsius (varies according to room temperature)
For this reason we would advise that the machine be placed on a firm surface, like a glass top table, wooden bedside cabinet, or on the floor if you have marble or similar surfaces.
Do not place the machine on top of beds, or inside the bed, on a carpeted floor, or on a pillow or clothing, as the operating temperatures will rise up to 20% higher due to the conductive nature of these fabric materials.
Holding the device in the hands for long periods may be uncomfortable so we suggest you follow the above advice and locate the machine only on a flat surface, such as a table.
This machine has been Quality Control Passed for years of continual successful operation.
Page 11
7.7. Technical Data
7.7.1 DAC
Digital frequencies from Direct Digital Synthesis and Digital Signal Processing are converted to analog before they are transmitted from the ETD. These Digital-to-Analog Converters are also known as DAC. The ETD signal goes through the DAC then it passes through a Low-Pass or Bandpass Filter to finish the analog conversion. The Frequency produced is a very accurate analog frequency with all the overtones and undertones of that analog frequency.
The analog frequency produced by a digital chip can be swept up or down with more accuracy than most frequency generators. The most important thing to remember is the frequency will be converted to analog before it is output from the ETD. Digitally produced frequencies when converted to analog are the most accurate. These analog frequencies when converted to a square wave produce the square wave harmonics as seen in (Fig. 2) Radio Frequencies are produced using Carrier Wave Impedence on a single bandwidth.
Page 12
7.7.2 WAVE TYPE
Wave type is Square Wave, the most reliable wave form tested for eliminating pathogens and disease treatments. Duty Cycle is fixed at 50% on the standard model, and 10% €“ 90% square wave duty cycle on the Professional model under Pulse mode option. (Fig. 1)
7.7.3 VOLTAGE and AMPERAGE
Voltage Output measured by an Oscilloscope will accurately measure the top of the Square wave (7.5v) added to the bottom of the square wave (7.5v) to produce the correct output reading of 15v
Output measured by a Multimeter will accurately measure the top of the Square wave (7.5v) only. The reading is instantaneous and will not account for the total true measurement (7.5 + 7.5 = 15v).
So please note, if you are measuring the output on your ETD with a multimeter, do realize that the measurement shown will only reflect 50% of the total output of your ETD device. This anomaly has to do with the inability of most multimeters to accurately measure voltages from a wave form. If in doubt always test ETD output with a professional Oscilliscope. Amperage output from DC source is 4500ma.
7.7.3 HARMONIC FREQUENCIES
Frequencies produce harmonics which progress from high to low and again to high within the wave output sequences (Fig. 2). The harmonics of a frequency consist of overtones and undertones of that frequency. In a device like the ETD frequency generator, the harmonics go on infinitely. Because with harmonics, not only will you get the healing effects of the frequency itself, you will also make it difficult for the pathogen to elude the given frequency.
Page 13
8. Introduction to ETD Frequency List
The revised edition of the ETD frequency list (The Electro Therapy Device Frequency List Edition 2011) provides the users of ETD a clear and comprehensive manual to use the Electronic Therapy device against various diseases and ailments.
This book has been adapted from the original CAFL-Frequency-List for use with your device and all programmable frequencies are mentioned in kilohertz (kHz).
8.1. The Electro Treatment Device List, (© ETD Association 2011)
This book has been compiled by medical researchers, who use machines, such as the Royal Rife machine or similar Digital Electro-Therapy Devices. The particular frequencies reflect successful medical treatments of patients at various RIFE frequency settings. The medical practitioners have made notes of the range of frequencies for a particular disease when the treatment was successful. These were then transcribed in this booklet.
Frequencies in this book reflect successful treatments using digital Electro-Therapy-Devices. They may not always be a cure for a disease, but the frequencies will assist in the relief of many diseases and illnesses. Many parasite specific illnesses can be treated and cured through the specific frequency programs outlined in the ETD Frequency lists.
All frequencies in this book are in Kilohertz (KHz). 1 KHz corresponds to 1000 Hz (i.e. 30000 Hz = 30.00 KHz). The range of the Digital Device is from 000.01 KHz up to 999.99 KHz (approx. 1 MHz (Megahertz). This frequency compilation has been brought into a form that allows you to program the frequency sets directly into your Digital Frequency Device.
Enter the frequency sets from this booklet on the navigation console directly into your machine to achieve an improvement in your symptoms, the cure of various diseases or physical ailments.
Page 14
8.2. Disclaimer
The C.A.F.L. Association holds no guarantees, that the Royal Rife frequencies within this book will cure any specific diseases. The listing is a guide compiled by Electro-Therapy medical staff, who have had successful results at these particular frequencies.
This Digital Device is licensed to use all ETD Royal Rife Frequency Sets
Page 15