Question:
He is asking about the GB4000 Super Mat Pack. His question is below.
Can you explain why everything else I am reading has also said that there needs to be a left and right component where your products merge into mono, so to speak?
On the belt at least, the video shows that there is a cable that merges into a single. That then merges back out into a double for the belt. My understanding is that there needs to be a left and right, which is why you hold onto a left and right cylinder, for example. So that the current, so to speak, travels from one to the other. Am I mistaken?
What I’m saying is that on the belt, the cable from the machine goes from 2 to 1, then back to 2. That means that the signal would be converting to “one” so to speak, but the value of the machine is that a current runs through, from one to the other. So if it’s going 2 to 1, there’s no cross current from red to black, so to speak.
I explained that there is a positive and negative lead. He might be asking why the lead breaks off into a positive/negative and there just isn’t one lead that connects to a one port and another separate lead into another port.
Answer:
The Mats provide a constant left right signal. There never is any merging of current. There are 2 clear signals across the wires and mats that are distinct and always separate positive and ground
At the point of the mat, the Positive and Earth are indicated by the Black and Red buttons, and the Mat has a positive side and an earth side, they do not connect
The action of you placing the mat against the body, creates the contact at the skin, which merges the positive and earth on the body, and permits the frequencies to flow into the body.for effective frequency healing.
Cables presented on the video, and in the GB4000-SMP kit are a cable with 2 separate positive and earth carrier wires, bound inside a black rubber signal shielded cable.
Link to the Healthproducts2 Home: | |
DISCLAIMER |