Technical Information

Magnetic Polarity and the Machines

Question: As regards the Digital Zapper Professional I have a question from a relative from Argentina: Some zapper sellers are saying that due to the magnetic polarity (Argentine is closer to the South pole), the zapper and the frequencies displayed on the The ETDFL 2016 list may not work as well as in our hemisphere

Magnetic Polarity and the Machines Read More »

Intensity – Older Machines and How they Compare

The “modern” Rife developers which included Dr Peter Williams, and Dr Susan James, who limited the output due to Sensitivity issues when the machine was developed in 2006. Trials were showing outstanding results with lower intensity output combined with the longest periods of treatments. Also the Sweep commands would keep switching frequencies continuously over this

Intensity – Older Machines and How they Compare Read More »

Straps – Are They Hospital Grade

The FLEX Straps are all Custom Manufactured to hospital grade and are sealed in the blue bags. The Velcro are made to the highest quality standards but are not sealed. Both type straps are custom made to highest standards, and are a custom size made specially for Rife Digital Machines and Hulda Clark Zappers.  

Straps – Are They Hospital Grade Read More »

Carrier Wave & Technical Information

There is a belief that the audio frequencies that were used in the original Beam Rays Clinical Rife Machine and its 1940’s and 1950’s AZ-58 replica Rife Machines are harmonic M.O.R. frequencies derived by dividing Dr. Rife’s original high RF frequencies down in octave steps until you reach the audio range of frequencies. For this

Carrier Wave & Technical Information Read More »

Power Adapters – New

New 2016 (Clip Type) power adapters are slightly higher voltage than the (Pre 2016) Models As the Beam Ray requires a higher power output, the voltage tolerance was lifted on all 2016 PRO models to accommodate this new “Beam Ray” machine. “Beam Ray 2016” will be attached to the RDP and will not use its

Power Adapters – New Read More »

CW, RF, M.O.R

CW is the preferred method to use for treatments Rife digital Professional uses the 3.8MHz Harmonic CW (Carrier wave) simultaneously while outputting the specific low range frequencies… as per Dr Rife’s instrument. This is the superior method of treatment over the static RF method, a more complex explanation here: There is a belief that the

CW, RF, M.O.R Read More »

CW vs RF

Question: What is the difference between Carrier Wave and Radio Frequency? Answer: CW is the preferred method to use for treatments Rife digital Professional uses the 3.8 MHz Harmonic CW (Carrier wave) simultaneously while outputting the specific low range frequencies… as per Dr Rife’s instrument. This is the superior method of treatment over the static

CW vs RF Read More »

Testing for Continuity on the Leads

Question: When testing the lead wires for damage. Should there be continuity between the black foot strap button and the center peg on the plug and continuity between the red foot strap button and the ring on the plug or vice versa Answer: Pre JANUARY 2015 Models were supplied with Black Button – Center Pole

Testing for Continuity on the Leads Read More »

Shopping Cart
Scroll to Top