Rife Professional and the Zappers are limited to 1Hz – 1 million Hz max for 2 reasons (1) All Frequencies for pathogens reside under 1 million Hz. Unless you want to Zap a cockroach or a mouse, then 1 million is adequate. (2) Frequencies above 1 million (and upwards) move to the animal and human […]
Question: I am looking into the different zappers and collecting information before I buy. can you help me understand why I do not need more than “30megahertz”? why not 40 megahertz? Answer: I believe you are referring to the Dr Clark 30Khz protocol? Dr Clark set the “Street Zappers” to 30khz as it was a
Question: I Am interested in your professional 30Mhz but Pacific health products online which sells the programable blaster claims the professional when measured by an oscilloscope only outputs 1Mhz. Can you clarify this for me?…. Answer: Rife Professional or Zapper Professional is limited to 1hz – 1 million hz max for 2 reasons (1) All
Why only 1 MHz output? Read More »
I want to hook up other type connectors to the machine. where can I purchase button cables? You can get these Buttons and Cables from China for $1 delivered, however they have a 1 OHM resister buried in the CAP which blocks the current http://www.ebay.com/itm/Brand-Anti-Static-ESD-Wrist-Strap-Discharge-Band-Grounding-Prevent-Static-/381080808085?pt=LH_DefaultDomain_0&hash=item58ba2faa95 Unfortunately the “Button Straps” product is only custom made for
All of our machines are 110v and 220v Adapter (Auto-switching) Link to the Healthproducts2 Home: DISCLAIMER
The Zapper Digital is more powerful than the Gamma Zapper. The Gamma Zapper is powered by a 2 x 1.5 volts AA producing about 0.3 Amp, Zapper Digital is powered by the 16 volt MED Adapter at 4.5 AMP, The Gamma Zapper cannot be programmed, however the Zapper Digital can, and comes with a frequency
How does the Gamma Zapper compare to the Zapper Digital Read More »
Zapper Digital and Rife Digital is powered by the 16 volt MED Adapter at 4.5 AMP Link to the Healthproducts2 Home: DISCLAIMER
Question: I’m moving to China in July (from Canada). After speaking with an electrician acquaintance in Korea, he has recommended that I used a regular power adapter as well as a UPS (uninterrupted power supply) adapter when I get to China. Does this sound like the best thing to do? Or, should I order a
Power Adapters are Rated for… Read More »
To use the Multimeter you want one that has a Hz setting. You would put that to the Hz setting. Have the leads connected to the machine; The machine turned on to a frequency using the Run command Then make sure the output light is on; Then put the positive probe on the positive strap
Testing using a Multimeter Read More »
Question: I have a question regarding your Digital Professional Zapper. I am interested to find out what is the OUTPUT VOLTAGE/CHANNEL (+ / -) measured at the snap on connectors. Answer: On the Multimeter the output will be measured at 16/2 = 7-8 volts On an Oscilloscope you will measure the correct frequency of 16